HIP Tungsten carbide cold forging dies
Carbide drawing dies
Widely used in drawing wires, bars, rods and tubes,special electrode, special drawing shape,poly gonal hole type,etc
Contact way;
Jennifer wong
Carbide drawing dies
Widely used in drawing wires, bars, rods and tubes,special electrode, special drawing shape,poly gonal hole type,etc
| GRADE | DENSITY | TRS | HARDNESS | Application recommended |
| (g/cm3) | (N/mm2) | (HRA) | ||
| YG11 | 14.4 | 2600 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. |
| YG15 | 14 | 3200 | 88 | For fabricating drawing dies of steel tubes and rods under High compressibility ratio; punching,stamping,forging tools under large stress. |
| YG20 | 13.5 | 3200 | 85.5 | For fabricating of stamping dies for watch parts, spring plates of musical instruments, battery jars, small sized steel balls, screws, screw caps. |
| YG16C | 13.9 | 2900 | 85.5 | Impact resistance forging dies. |
| G18C | 13.7 | 3100 | 84.5 | Impact resistance forging dies, hot-press forging dies and rollers. |
| YG20C | 13.5 | 3300 | 83.5 | Dies for wear resistant or impact resistant application. |
| YG22C | 13.3 | 3500 | 83 | Nut forming dies and high impact resistance forging dies |
| YG25C | 13.1 | 3600 | 82.5 | Stainless bolt header dies and rollers. |
| Dim.of d1 | ≤0.5 | >0.5-2.0 | >2.0-3.2 | >3.2-6.0 | >6.0-12 | >12-25.0 | >25.0-up |
| Tolerances | 0 -0.01 | 0 -0.015 | 0 -0.02 | -0.01 -0.03 | -0.01 -0.04 | -0.02 -0.06 | -0.03 -0.10 |
Contact way;
Jennifer wong